Samples of jobs done with Hydraulic Shear C2006 CNC
NEW CNC Guillotine C2006 Nargesa with compact CNC control. Max. cutting length: 2030 mm Max. thickness: 6 mm.
The latest generation CNC Vertical cut shears NARGESA, are made of stabilized, welded steel that allows to stand big efforts without deformation.
Cutting length: 2030 mm. Max. thickness in steel: 6mm. Max. thickness in Stainless Steel: 4 mm.
All Nargesa products are according to the CE normatives and regulations for manufacturing of industrial machinery.
Our customers say
-
I’m so happy that I opted for this NARGESA brand in acquiring CNC Press Brake, Shearing and Non Mandrel Pipe Bender. Even if I have no experience with this brand, since I found this only from searching the internet, I have a high hope for the quality of these European machines which did not disappoint. On behalf of Newcore Industries, I would like to say that we are very satisfied with these machines. Even though the price is on the high side compared to the machines from China, there are no regrets in paying the premium. I can imagine based on the initial operation, these machines will last longer and will give an accurate and precise finished products. The mere fact that the warranty is longer, NARGESA is so confident on their products. The machines are so easy to operate because of the technology they have. No waste of time and materials because you can program the operation automatically and you can simulate the process before the start of production. The graphic aid of the CNC is superb not to mention remote monitoring feature of these machines.
— Daniel de Jesus - General Manager at Newcore Industries (Philippines)
Technical features
The last generation of NEW CNC vertical cutting Shears C2006, allows to cut any type of metal in a clean and accurate way. Vertical cut shearing is a lot more precise and with its consequent lower energetic expense and cost of the blades.
The main advantages of the vertical cut in comparison to the swing cut are:
Energetic saving
Resistance of material in vertical cut is much lower, which becomes a considerable energetic saving.
Cutting quality
Clean, perfect and accurate cut.
Life of the blades
The blades wear is almost nule. The life of the blades is 4 times higher than other shearing systems.
The C2006 CNC Shear is supplied as standard with the following components:
High resistance structure
- One block bench, mechanized, equipped with spheres to ease up the movement of the sheet.
- Initial support machined to square of 1000mm with millimeter scale.
- Two 1000mm millimetered stand arms.
- LASER lightning on the cutting line.
- LED front lightning.
- Front polycarbonate protection screens that allow to see the cutting line.
- Cutting of narrow strips without distortion.
- 4-cutting edged upper and lower blades, with 90º angle, long lasting and the proper ones for cutting of steel.
- Driving with safety pedal and emergency stop.
- Back overture with safety optoelectronic devices.
- Low noise level, improving the quality of work of the operator.
- Ramp of material extraction located in the lower part of the cutting zone allows the material to slide down to the extraction area.
- Cutting length: 2030 mm.
- Cutting capacity: 6 mm in steel (450N/mm2) andy 4 mm in S.S.(700N/mm2).
- Gauge displacemnt: 700 mm.
- Goose neck for cuts with bigger length: 190 mm.
- Strokes per minute: 10 Strokes. (All length).
- Hydraulic rammers: 10 units.
- Fix cut inclination: 1,75º.
- Motor power: 5,87 KW / 7,87 CV.
- 3-Phased tension: 230/400 V. 50/60 Hz
- Hydraulic Pump: 16 liters.
- Container capacity: 73 liters.
- The machine is delivered completely assembled
Precision rear gauge
- Rear gauge fixed to the structure.
- Accuracy and repeatability of positioning from +/- 0,1mm.
- Low maintenance thanks to the use of low friction elements.
ESA S625 compact CNC
- The control interface is very intuitive and easy to use.
- Internal database of materials.
- Configuration of the piece length by the CNC.
Enhanced hydraulic group
- Automatic regulation of the cutting pressure depending on the need for cutting power.
- Automatic regulation of the pressure of the sheet fastenings.
All our products are manufactured in our facilities in Sapin. Hydraulic and electronic components are completey standard from the best European leading trademarks, with technical servie all over the world: Rexroth, Bosch, Roquet, Schneider Electric, LG, Telemecanique, Pizzato...
Download (20.61 MB)
Download (1.46 MB)
+ Info for Hydraulic Shear C2006 CNC
Compact CNC control ESA S625
The operator only has to enter the type of material, thickness, distance from the gauge and the CNC will automatically arrange all components to obtain an optimal result.
- Equipped with a 7 "touch screen which makes all operations on the machine simpler and more intuitive.
- You can manage up to 3 axes and 16 + 12 I / O with an integrated PLC.
- Storage of thousands of parts programs.
- 7 "800x480 color touch screen resolution
- 128 MB silicon disk.
- 2 analog inputs, 12-bit resolution.
- 16 digital inputs (24Vdc).
- 16 digital outputs (24V DC, 0.7 A max.) Protected against overloads and short circuits.
- 1 RS232 serial port
- 1 CAN port with 9 contacts Sub D F connector.
- 24Vdc power supply.
- 1 USB input.
- 1 Ethernet port that allows connection remotely.
Dimensions of the machine Hydraulic Shear C2006 CNC
Dimensions of the machine: 2880x2360x1790 mm.
Weight: 5100 Kg.
Tariff Item Code: 84623300
Other Features:
- The machine is delivered completely assembled.
Characteristics of the packaging Hydraulic Shear C2006 CNC
Nº Pallets: 1.
Width: 2900 mm.
Length: 1800 mm.
Height: 1800 mm.
Volume: 9,4m3
Nett weight: 5100 Kg.
Gross weight: 5111 Kg.
Tariff Item Code: 84623300
Other Features:
- The machine is delivered completely assembled.
- Packing with retractile film.
- Optional: Complete wooden packing NIMF15
Uses of the machine Hydraulic Shear C2006 CNC
Last generation CNC vertical cut Shears C2006, allows cutting any kind of metal in a clean and exact way. The shearing is much more accurate, what turns out in a reduced energetic consumption and minimum wear of blades.
