MX700 Instructions book

---

1. CHARACTERISTICS OF HYDRAULIC PUNCHING AND SHEARING MACHINE MX700

1.1. General characteristics

Motor 5.5 Kw/7.5 HP at 1460 r.p.m.

Intensity 21/12 A

Pump 16 l./m.

60 liter tank

Double acting piston (70 T.)

Maximum pressure 200 Kg.

Structure of sheet

Total weight 2000 Kg

Dimensions: 1150x1390x2080 mm

1.2. Description of the guards

Protection devices of the MX700 are the extractor at the front of the machine to hold the material and avoid putting your hands between the punch and the workpiece.
It also has a screen to prevent fragments projections, this display has a security system to prevent the punch from descending if the screen is raised, only if the key to cancel safety is turned, then it coul be possible to work with with the hazard light.

---

2. TRANSPORT AND STORAGE

2.1. Transport

There are two ways of carrying out the transportation of the machine.
One of them is lifting it by its lower part using a forklifting truck as indicated in picture 3 and the other one is by using a crane of forklifting truck as well and grabbing it by the clamping spot on the upper side.

2.2. Storage conditions

The punch can never be stored in a place where it does not meet the following requirements:
* Humidity 30% to 95% non-condensing.
* Temperature -25 to 55 ° C or 75 ° C for periods not exceeding 24 hours (remember that these temperatures are in storage).
* It is advisable not to stack heavy objects or machines.
* Do not disassemble for storage.

---

3. INSTALLMENT AND STARTING UP

3.1. Location of the machine

Efforts will be made to locate the machine properly to avoid having to move, otherwise the user must follow the guidelines described in section transport (nº2). It should be placed on a flat, level surface to prevent vibration and movement of the joint while performing. It is possible to fix the machine by bolts as is provided with a lower base or foot with four holes.

3.2. Dimensions and working site

When the machine is placed on site its dimensions, the workspace of the operator and the possible lengths of the workpiece are to be taken into account.
The machine must be used by a single operator, which is to be placed frontally to the machine, never in a lateral area because he has to control the whole machine and also main protections are designed to use the front of it.

3.3. Admissible outer conditions

- Temperature betwee +5ºC and +40ºC without exceeding an average temperature of +35ºC during 24h
- Humidity between 30% and 90% with no water condensation.

3.4. Connection to power supply

IMPORTANT: This machine must be connected to a single outlet with earthing.
The MX700 is equipped with a three phased engine 230V / 400V with 5,5Kw connected on a star shape to connect into a power supply of 400V. It should be connected to an only power supply with the indicated requirements. If the line tension is not the indicated one then there must be carried out a change of connection of the motor bobins and the inverter.

---

4. ACCESSOIRES

 

Refference                                Radius in mm                                   Required fitting
MRE28                               Radius from 3 to 15mm                        TAP 28        CAB 46
MRE40                              Radius from 16 to 22mm                       TAP 40        CAB 60
MRE50                               Radius from 23 to 30mm                      TAP 50        CAB 78

​For different sizes, please ask the manufacturer.

 

Flat bar round end tooling R1​

Refference                   Model                     Width size                           Required fitting
MOR1-35A                      A                     From 20 to 35mm                       TAP28 / TAP40
MOR1-35B                      B                     From 20 to 35mm                       TAP28 / TAP40
MOR1-35C                     C                      From 20 to 35mm                       TAP28 / TAP40
MOR1-35D                     D                      From 20 to 35mm                       TAP28 / TAP40
MOR1-50A                     A                      From 40 to 50mm               TAP50 / TAP60 with ATAP
MOR1-50B                     B                      From 40 to 50mm               TAP50 / TAP60 with ATAP
MOR1-50C                     C                       From 40 to 50mm               TAP50 / TAP60 with ATAP
MOR1-50D                     D                      From 40 to 50mm               TAP50 / TAP60 with ATAP

For different sizes, please ask the manufacturer · When placing order it must be specified the REFFERENCE, MODEL, R (radius), W (flat bar width), T (flat bar thickness) · In models B, C and D specify diemeter of the hole · The ear shaped legth is always adjustable · Production capacity: 450 to 600 parts per hour.

 

Flat bar round end tooling R2

Refference                   Model                     Width size                           Required fitting
MOR2-35A                      A                     From 20 to 35mm                       TAP28 / TAP40
MOR2-35B                      B                     From 20 to 35mm                       TAP28 / TAP40
MOR2-35C                     C                      From 20 to 35mm                       TAP28 / TAP40
MOR2-50A                     A                      From 40 to 50mm               TAP50 / TAP60 with ATAP
MOR2-50B                     B                      From 40 to 50mm               TAP50 / TAP60 with ATAP
MOR2-50C                     C                      From 40 to 50mm               TAP50 / TAP60 with ATAP

For different sizes, please ask the manufacturer · When placing order it must be specified the REFFERENCE, MODEL, R (radius), W (flat bar width), T (flat bar thickness) · In models B, C and D specify diemeter of the hole · The ear shaped legth is always adjustable · Production capacity: 450 to 600 parts per hour.

 

Stripping Tooling 90º Adjustable 100x100 MX700 · REF. 140-02-02-00032

Stripping tooling for metal sheet, angle, etc. Adjustable up to 100x100mm to 90º fixed.

Units per machine: 1 
Max. Cutting capacity: 100x100x5
Weight: 21 Kg

Stripping Tooling 90º Adjustable 150x150 MX700 · REF. 140-02-02-00001

Stripping tooling for metal sheet, angle, etc...Adjustable up to 150x150mm to 90º fixed.

Units per machine: 1 
Max. Cutting capacity: 150x150x8
Weight: 38 Kg

Folding Tooling 100mm. MX700 · REF. 140-02-02-00033

Tooling for folding metal sheet and flat bar up to 100mm.
Punch: 88º. Die with V for 56mm and V for 26m.

Units per machine: 1
Max. Folding length: 100mm
Max. Folding thickness: 8 to 12mm 
Weight: 9 Kg

Folding Tooling 170mm. MX700 · REF. 140-02-02-00034

Tooling for folding sheet and flat bar up to 170mm.
88º punch. Dies with V for 56mm and V for 26m.

Units per machine: 1
Max. Folding length: 170mm
Max. Folding thickness: 8 to 12mm 
Weight: 13 Kg

Folding Tooling 350mm. MX700 · REF. 140-02-02-00043

Tooling to fold metal sheet and flat bar up to 350mm.
Punch: 88º. Die with adjustable V of 120mm, 80mm, 40mm and 16mm.

Units per machine: 1
Max. Folding length: 350mm
Max. Folding thickness: 20mm 
Weight: 45 Kg

Ventilation Grip Tooling MX700 · REF. 140-02-02-00031

Tooling to make ventiolation grips in metal sheet.
Adjustable amount of punchings which are to be made one by one.

Units per machine: 1 
Punching size: 100x20mm
Max. Thickness: 2mm 
Weight: 21Kg

Angle Cutting Tooling. MX700 · REF. 140-02-02-00036

Tooling for cutting angles from 90º up to 45º.

Units per machine: 1 
Max cutting capacity Straight cut: 80x80mm
Max. Cutting capacity Miter cut: 50x50mm
Weight: 32 Kg

Flat bar Cutting Tooling 100 x 12. MX700 · REF. 140-02-02-00037

Tooling for cutting metal sheet or flat bar from 0.8mm up to 12mm thickness.

Units per machine: 1  
Max. Cutting capacity: 100x12mm 
Weight: 29 Kg

Flat Bar Cutting Tooling 200 x 20. MX700 · REF. 140-02-02-00002

Tooling for cutting flat bar or metal sheet from 0.8mm up to 20mm Thickness.

Units per machine: 1  
Max. Cutting capacity: 200x20mm 
Weight: 54 Kg

Round Bar Cutting Tooling MX700 · REF. 140-02-02-00038

Tooling for cutting round bar from 3mm up to 35mm.

Units per machine: 1 
Max. Cutting diameter: 35mm 
Min. Cutting diameter: 3mm
Weight: 16 Kg

Fence Post End Tooling MX700 · REF 140-02-02-00039

Tooling to flatten and punch the pipe for fences. It admits different pipe diameters. Exchangeable hole size.

Pieces by tooling: 2 
Pipe Max. Diameter: 50mm
Min. Pipe diameter: 10mm
Hole Diameter: Exchangeable
Weight: 24 Kg

Arrow Tooling for Pipes MX700 · REF. 140-02-02-00040

Tooling for flattening and cutting pipes in arrow shapes. Suitable for different diameters.

Units per machine: 1 
Max. Pipe Diameter: 30x2mm
Min. Pipoe Diameter: 10x2mm
Weight: 20 Kg

Arrow tooling for Metal Sheet MX700 · REF. 140-02-02-00041

Tooling for punching metal sheet in arrow shapes for fences.

Units per machine: 1 
Sheet Max. Thickness: 3mm
Weight: 22 Kg

Angle and U Profile Punching Machine MX700 · REF. 140-02-01-00031

Base holder for punching angles. The punches and dies of different diameters are exchangeable.

Units per machine: 1  
Max. Hole Diameter: 28mm
Min. Hole Diameter: 2mm
Weight: 7 Kg

Flattening Tooling MX700 · REF. 140-02-02-00042

It’s an extractor which acts as the flat bar holder at the punching time to prevent the flat bar from deformation while being punched.

Pieces per tooling: 1 
Bar or flat bar max. thickness: 15mm 
Weight: 15 Kg

Locks Punch and Die MX700 · REF. 140-02-01-00036

Set of punch and die to make the locks punching in metal sheet.
Necessary complements: CAB60 and TAP40

Pieces per set: 2 
Max. Thickness: 6mm
Weight: 1 Kg